GP acetate sealant: silicone adhesive is suitable for all kinds of doors and windows to install elevator, stone, children's room, movable board room, container, aluminum plastic board, stainless steel and other weatherproof waterproof seal, it also has many other architectural and industrial uses: when assembling products for decoration and sealing waterproof.

Silicone structural interface design needs to be prepared by professional designers according to the general design guidelines of the construction industry.

The basic design principles of typical silicone structural interface design include:

A: The width of structural adhesive should not be less than 6 mm

B: The thickness of structural adhesive should not be less than 6 mm

C: The width of structural adhesive must be equal to or greater than the thickness of structural adhesive

D: Formula for calculating small width of structural adhesive

E: The interface of structural adhesive needs to be able to use the general standard construction method to fill the adhesive

F: The interface of structural adhesive shall not move during curing

G: The interface design allows the structural adhesive to come into contact with air to facilitate curing

H: When silicone structural sealant is used to support load, its load design strength is 6.9kpa

Note: other special systems may have different design criteria. The fitness criteria for such systems will vary according to the specific design.

http://www.rdsilicone-china.com/